Converting a chest freezer to a refrigerator and why you should do it to.
Low quality five minute write up.
Cold air falls and hot air rises. Unless your upright refidgerator is packed 100% full you cool air is falling out every time you open it. In a video by Mikey Sklar ( https://www.youtube.com/watch?v=ISJLyHK457I ) some metrics like 2000watts vs 100watts for a upright refridgerator vs a chest freezer is crazy but close to the truth. A run of the mill chest freezer can be controlled by a temperature controller to turn the freezer on and off to maintain a temperature you desire.
- Enclosure: http://www.amazon.com/gp/product/B005T57NX8
- Power input: http://www.amazon.com/gp/product/B00843KZP0
- Controller: http://www.amazon.com/gp/product/B008KVCPH2
- Power output: http://www.amazon.com/gp/product/B008J80J1A
- + some wire ends.
How to program the STC-1000 https://www.youtube.com/watch?v=TQjicdtDVrQ
So I got frustrated with the enclosures and spent the money on the Bud which is just the right size. I traced and drew the cutouts on the box. Using my drill press and a small drill bit I dotted the lines. I then used some snips to cut out the holes. A woodworking rasp and metal file were used to get to the final shape. I put everything in and found some 14ga wire for the loaded wires and some 18ga to power the STC-1000. It works and now I need to go get a chest freezer. Note: Auto defrost is not needed if you are using as a fridge. The auto defrost is very helpful if you want to freeze. You can always alter this with the heating side of the STC-1000 to do some other tasks like brewing, heating your office or tiny house (up to 10amp) or some other random temperature dependant task.